Setting Metric Thresholds by Budget Tier
The right minimum DR for a modest campaign is not the right minimum for a flagship one, and vice versa.

A single fixed metric threshold — “only DR 30+” or “only sites with X traffic” — applied uniformly across every campaign regardless of budget tends to produce mismatched decisions: too strict for smaller budgets, too loose for larger ones. Tiered thresholds, set deliberately around what each budget level can realistically achieve, work better in practice.

Why one fixed threshold fails
A modest budget applying an ambitious threshold designed for a flagship campaign will simply come up short of viable options, wasting time chasing sites that were never going to accept the offer at that price point. A large, flagship budget applying a modest threshold meant for smaller campaigns risks under-investing in genuinely stronger, more expensive placements that the budget could actually afford.
A tiered approach
| Budget tier | Reasonable authority focus | What to prioritise instead |
|---|---|---|
| Modest / exploratory | Lower DR/DA floor, wider net | Niche relevance, genuine content quality, promising new domains |
| Mid-range, ongoing | Moderate floor with room for exceptions | A mix of established and rising sites, balanced portfolio |
| Flagship / high-value | Higher floor, tighter quality bar | Manual vetting depth, traffic trend, relationship value |
Exact numeric floors vary too much by niche to prescribe universally — a competitive niche like finance will naturally require higher thresholds at every tier than a smaller, less contested niche. Set your own floors relative to what similar sites in your niche typically show, rather than importing a number from an unrelated industry.
Building flexibility into thresholds
Rather than a single hard cutoff at each tier, consider a soft threshold that triggers deeper manual review rather than automatic rejection, particularly near the boundary. This avoids losing genuinely good sites that sit just below a somewhat arbitrary line, while still keeping the bulk of low-quality prospects filtered out efficiently — see https://successtoroad.com/blog/bulk-domain-check-for-prospect-lists/ for applying this at scale.
Special cases within a budget tier
- New domains — apply the more lenient, content-and-team-based approach in https://successtoroad.com/blog/metrics-for-new-domains/ rather than the same authority floor used for established sites, even within a fixed budget tier.
- Local sites — as covered in https://successtoroad.com/blog/metrics-for-local-sites/, judge on local relevance rather than the same national-scale floor.
- Non-English sites — adjust for coverage gaps as described in https://successtoroad.com/blog/metrics-for-non-english-sites/ rather than applying an unadjusted global threshold.
Connecting thresholds to price expectations
Since price does not reliably track authority (see https://successtoroad.com/blog/why-price-does-not-track-authority/), a fixed budget does not automatically map to a fixed metric floor either — you may be able to afford a higher-authority site in a lower-demand niche than in a highly competitive one at the same price point. Build your thresholds around realistic market pricing in the specific niche you are buying in, not a generic industry-wide assumption.
Turning tiers into a working model
Formalising budget tiers alongside the weighting approach in https://successtoroad.com/blog/scoring-model-for-publisher-selection/ gives a repeatable system: each tier has its own floor and its own relative weighting, rather than a single formula applied uniformly regardless of what is actually being spent.
Reviewing thresholds against actual results
Thresholds set at the start of a campaign should not be treated as permanent. Reviewing which placements, at which metric levels, actually delivered the results you cared about, whether referral traffic, ranking improvements, or genuine brand exposure, over several months gives you real evidence to refine your thresholds rather than relying purely on assumptions made before any campaign data existed. A threshold that looked reasonable on paper may prove unnecessarily strict, or not strict enough, once measured against real outcomes.
Communicating thresholds across a team
When more than one person makes buying decisions, writing thresholds down explicitly, tier by tier, avoids the inconsistency that comes from each person applying their own informal sense of what counts as good enough. A shared, documented set of tiered thresholds, revisited periodically, keeps decisions reasonably consistent even as the specific people making them change over time.
Accounting for currency and market differences in budget tiers
What counts as a modest, mid-range, or flagship budget varies by market and by the buyer’s own scale of operation. A budget that represents a flagship-tier spend for a small local business may be a modest, exploratory-tier spend for a larger, well-funded national brand. Set your own tiers relative to your typical spend patterns rather than adopting fixed figures that might not reflect your actual market position.
Revisiting tiers as your programme matures
A link-building programme that has been running for a while typically accumulates enough of its own outcome data to set thresholds more precisely than it could at the very start, when tiers had to be based mostly on general assumptions about the market. Treat your early tiered thresholds as a reasonable starting estimate, and expect to refine them meaningfully once you have enough completed placements to judge against.
Where to go next
For full context on the metrics these thresholds apply to, see https://successtoroad.com/blog/seo-metrics-explained/. Filter prospects by relevant metric ranges directly in https://successtoroad.com/marketplace/, and screen a longer list efficiently with https://successtoroad.com/blog/bulk-domain-check-for-prospect-lists/.
Frequently asked questions
Should every campaign use the same DR threshold?
No, thresholds should reflect the specific budget tier and niche of each campaign rather than one fixed rule applied everywhere, since a reasonable floor in one niche or budget level may be unrealistic or overly loose in another.
How do I decide what threshold is reasonable for my niche?
Look at typical metrics among plausible, relevant sites within your actual budget and niche, rather than adopting a number from an unrelated industry or a generic online rule of thumb.
What should I do with sites just below my threshold?
Consider a soft threshold that triggers manual review rather than automatic rejection for sites near the boundary, since a rigid cutoff can exclude genuinely good options over a small margin.
Do new domains need their own separate threshold?
Yes, generally — applying the same authority floor used for established sites to brand-new domains unfairly excludes promising newer options; see {{post:metrics-for-new-domains}} for the right approach there.
How often should budget-tier thresholds be reviewed?
Periodically, alongside your broader scoring model review, especially if you notice your current thresholds are consistently producing too few or too many viable prospects for a given tier.
Put it into practice
Filter 54,483 websites by DR, traffic, niche and price, and order with escrow — you pay only after the link is live.
Browse the marketplace

